DC/DC Converters

Deutronic DVC500 SERIES DC/DC Converter

The Deutronic DVC500 Series DC/DC Converter is a high-performance solution designed for automotive and industrial applications, delivering up to 500W of continuous power. Engineered to support demanding environments, it provides efficient and stable power conversion tailored for modern vehicle systems.

Read More

View Models
Deutronic DVC500 SERIES DC/DC Converter

Features

  • 500W Automotive and Vehicle Converter
  • Designed for use in rough environment
  • Rugged construction / potted device
  • Protection against unfavourable environmental conditions
  • DC/DC wide range input
  • Filtered against vehicle on-board disturbances
Specifications
INPUT
Input voltage 36V, 48V, 72V, 96V, 110V
Input range See selection table
Filtering Filtering against on board disturbances
OUTPUT
Output voltage 12.5Vdc, 13.8Vdc, 24.3Vdc
Output Voltage Tolerance +/- 1%
Output Current See Selection Table
Current Limiting Typically 1.1 x I nominal
Load Regulation +/-0.5% (Typ 0.3% = 80mV) 10-90% load
Regulation time <1 ms
Line regulation ±0.1%
Temperature drift -25C to +70C <1%
Ripple & noise 100mVp-p
Efficiency 92% Typical
Parallel Operation Unlimited, 100% redundancy requires external diodes
ENVIRONMENT
Ambient temperature -40°C to 75°C with derating, Max baseplate temperature 100°C
Storage temperature -40°C to 85°C
Humidity 100% relative humidity, dewing permitted.
Cooling Natural convection / cooling via contact to mounting surface.
STANDARDS AND APPROVALS
Safety EN60950, EN50155, EN1175, ISO20898
EMC EN61204-3
PROTECTION
Protective degree IP67 (not connector)
Reverse polarity protection External input fuse is blown.
Over temperature Protection Protective shut down, self reset after cool down.
Insulation Input to Output: 1.5kV Input to Case: 1.5kV Ouput to Case: 500V
Over voltage protection Protective shut down Self reset after cool down.
Safety Note If an external energy source (e.g battery) is connected to the output of the converter, the supply line (+pole)must be fused close by the source. Recommended fusing: 1.1.. 1.2 x Inom
MECHANICAL
Connectors Input: +Uin (M5) / -Uin(M8) Output: +Uout (M6) / -Uout(M8)
Dimensions 222(220) x 166(122) x 71(47)mm
Weight 2.65Kg
Case Material Aluminium
Selection Table
MODEL INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT POWER
DVC500-36-24 36VDC (25-70VDC) 24VDC 21A 500W
DVC500-48-12 48VDC (33-90VDC) 12.5VDC 40A 500W
DVC500-48-13.8 48VDC (33-90VDC) 13.8VDC 36A 500W
DVC500-48-24 48VDC (33-90VDC) 24VDC 21A 500W
DVC500-48-28.8 48VDC (41-80VDC) 28.8VDC 17.4A 500W
DVC500-80-12 72/80/96/110VDC (56-154VDC) 12.5VDC 40A 500W
DVC500-80-13.8 72/80/96/110VDC (65-154VDC) 13.8VDC 36A 500W
DVC500-80-24 72/80/96/110VDC (56-154VDC) 24VDC 21A 500W
Technical Illustrations
Downloads
Deutronic_DVC500_ds.pdf
INPUT
Input voltage 36V, 48V, 72V, 96V, 110V
Input range See selection table
Filtering Filtering against on board disturbances
OUTPUT
Output voltage 12.5Vdc, 13.8Vdc, 24.3Vdc
Output Voltage Tolerance +/- 1%
Output Current See Selection Table
Current Limiting Typically 1.1 x I nominal
Load Regulation +/-0.5% (Typ 0.3% = 80mV) 10-90% load
Regulation time <1 ms
Line regulation ±0.1%
Temperature drift -25C to +70C <1%
Ripple & noise 100mVp-p
Efficiency 92% Typical
Parallel Operation Unlimited, 100% redundancy requires external diodes
ENVIRONMENT
Ambient temperature -40°C to 75°C with derating, Max baseplate temperature 100°C
Storage temperature -40°C to 85°C
Humidity 100% relative humidity, dewing permitted.
Cooling Natural convection / cooling via contact to mounting surface.
STANDARDS AND APPROVALS
Safety EN60950, EN50155, EN1175, ISO20898
EMC EN61204-3
PROTECTION
Protective degree IP67 (not connector)
Reverse polarity protection External input fuse is blown.
Over temperature Protection Protective shut down, self reset after cool down.
Insulation Input to Output: 1.5kV Input to Case: 1.5kV Ouput to Case: 500V
Over voltage protection Protective shut down Self reset after cool down.
Safety Note If an external energy source (e.g battery) is connected to the output of the converter, the supply line (+pole)must be fused close by the source. Recommended fusing: 1.1.. 1.2 x Inom
MECHANICAL
Connectors Input: +Uin (M5) / -Uin(M8) Output: +Uout (M6) / -Uout(M8)
Dimensions 222(220) x 166(122) x 71(47)mm
Weight 2.65Kg
Case Material Aluminium
MODEL INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT POWER
DVC500-36-24 36VDC (25-70VDC) 24VDC 21A 500W
DVC500-48-12 48VDC (33-90VDC) 12.5VDC 40A 500W
DVC500-48-13.8 48VDC (33-90VDC) 13.8VDC 36A 500W
DVC500-48-24 48VDC (33-90VDC) 24VDC 21A 500W
DVC500-48-28.8 48VDC (41-80VDC) 28.8VDC 17.4A 500W
DVC500-80-12 72/80/96/110VDC (56-154VDC) 12.5VDC 40A 500W
DVC500-80-13.8 72/80/96/110VDC (65-154VDC) 13.8VDC 36A 500W
DVC500-80-24 72/80/96/110VDC (56-154VDC) 24VDC 21A 500W
Deutronic_DVC500_ds.pdf

Find the Right Model

Model Number Input Voltage (Vdc) Output Voltage (Vdc) Output Current (A)
product variant DVC500-36-24 36Vdc: 25...70Vdc 24.3 Vdc 21A
product variant DVC500-48-12 48Vdc: 33...90Vdc 12.5Vdc 40A
product variant DVC500-48-13,8 48Vdc: 40...90Vdc 13.8Vdc 36A
product variant DVC500-48-13,8/ITO12 48Vdc: 40...90Vdc 13.8Vdc 36A
product variant DVC500-48-24 48Vdc: 33...90Vdc 24.3Vdc 21A
product variant DVC500-80-12 72/80/96/110 Vdc: 56...154Vdc 12.5Vdc 40A
product variant DVC500-80-13,8 72/80/96/110 Vdc: 56...154Vdc 13.8Vdc 36A
product variant DVC500-80-24 72/80/96/110 Vdc: 56...154Vdc 24.3Vdc 21A

Need help finding the right product model?