Product Quick Selection Wheel

POWERBOX Marine Line PT576 Series

Features
  • Marine Supply up to 125W
  • GL approved for bridge use (pending)
  • EN60945 compliant
  • Efficiency above 90%
  • Active Power Factor Correction
  • Overload and overvoltage protection
  • Thermal overload protection
  • Conformal coating
  • DC OK potential free contact
  • Cooling by free air convection
  • DIN-Rail mounting on back or side
  • RoHS compliant
  • Internal redundancy diode
  • Single or parallel mode user selectable

PT576 Series

Product Overview

POWERBOX Marine Line 125 

125W AC/DC DIN-Rail for Marine and Off Shore Applications 

Description   Powerbox Marine Line PT576 power supplies for marine, offshore and demanding industrial applications have DIN-rail mounting and GL approval for ship bridges placement (EN60945). In addition the products meet requirements set for tough environmental standards, which makes them suitable for demanding areas..

Specifications

INPUT
Input voltage 90 - 265 VAC, 125 - 375 VDC
Frequency 47 - 63 Hz, 440 Hz with reduced PFC.
Inrush current 30 A; cold start @ 230 VAC / 25°C
Input current <0.65A @ 230VAC
Input fuse 3.15AT, internal, not user serviceable
Efficiency >90%
Leakage current < 3.5 mA.
OUTPUT
Output Voltage 24 V, adjustable 23 - 29 V
Output power 125W. Peak power 187.5W (10s).
Minimum load 0 A
Load Regulation ±0.5%.
Temperature coefficient ±0.02%/°C.
Overvoltage protection 32 V
Overload protection User selectable (see table 1).
Peak short circuit current 10A (<100ms).
Overtemp. protection +90°C internal temp.
Turn-on delay < 2 s @ 90 VAC.
DC OK signalling

LED on front:

Green = DC OK

Flashing Red = Overload

Red = DC Fail

Potential free contact;

active closed; I < 1 A.

open voltage < 30V.

General
Isolation voltage

3000 VAC Input/Output.

2000 VAC Input/Chassis.

Weight <0.8 kg
Dimensions (LxWxH)

132 x 37 x 128 mm.

Excluding DIN-Rail mounting device.

Add 10mm for standard mounting device and

EN50022 DIN-Rail.

Warranty 2 Years.
ENVIRONMENTAL
Operating temperature –25 to +70°C without derating.
Storage temperature –40°C to +85°C.
Humidity

5 - 95%; non-condensing @ +55°C.

Conformal coating

Vibration

Germanischer Lloyd table 3.16

High vibration strain.

±1.6 mm displacement; 2 25 Hz

4g; 25 100 Hz (1 octave/min).

Altitude

10,000 feet; operating.

30,000 feet; non-operating.

STANDARDS
Safety approvals According to EN60950.
EMC Emissions EN60945 conducted & radiated.
Harmonics EN61000-3-2 compliant.
ESD EN61000-4-2 Air ±8kV, Contact ±6kV.
Electromagnetic fields EN61000-4-3 10V/m 8MHz-2GHz.
EFT/Burst EN61000-4-4 2kV.
Surge EN61000-4-5 Line-Line 0.5kV, Line-GND 1kV
Conducted immunity EN61000-4-6 3VRMS 150kHz-80MHz
Conducted LF

IEC60533 3VRMS 50Hz-12kHz.

HV immunity

IEC60947-2 2kV, 60s

GL

Germanischer Lloyd.

Environmental category: D, EMC1.

Guidelines for the Performance of Type.

Approvals Chapter 2, Edition 2003.

CE approvals

EMC Directive 2014/30/EU.

Low Voltage Directive is 2014/35/EU.

Technical Illustration

  • PT576 - Mechanical PT576 - Mechanical
  • PT576 - Pin Connection PT576 - Pin Connection
Back to Top

Your Sales Enquiry