Product Quick Selection Wheel

DRP 24V 3PH SERIES DRP 24V 3PH - Delta AC/DC DIN Rail

Features
  • 24VDC 60W - 960W
  • Universal AC input voltage: 3 x 320Vac – 600Vac (3-Phase)
  • 2 x 360Vac – 600Vac (2-Phase)
  • No power de-rating for entire input voltage range
  • Power Boost of 150% for 5 seconds (480W: 200% for 2 seconds)
  • Corrosion resistant aluminium chassis
  • Conformal coating on PCB to protect against chemical & dust pollutants
Specification Sheet Make a Sales Enquiry

DRP 24V 3PH - Delta AC/DC DIN Rail

Product Overview

 

Delta Electronics CliQII 24Vdc 3 Phase DIN Rail Power Supplies

The CliQ II 3-Phase DIN rail power supply series offers output voltage of 24V. These products are encased in rugged yet lightweight full aluminium body that can withstand shock and vibration according to IEC 60068-2 standard.

The series of 3-Phase products can operate over a wide temperature range of -25°C to +80°C. These products also feature universal AC input voltage range for 2-phase from 200Vac to 500Vac, and the power will not de-rate throughout the entire range.

Another great feature is the conformal coating on the PCB Assembly. The design conforms to harmonic current emission IEC/EN 61000-3-2, Class A.

Specifications

OUTPUT
Model DRP024V060W3BN DRP024V120W3BN DRP024V240W3BN DRP024V480W3BN DRP024V960W3BN
Output Voltage 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc
Output Voltage Range 24V - 48Vdc 24V - 48Vdc 24V - 48Vdc 24V - 48Vdc 24V - 48Vdc
Output Current 2.5A 5A 10A 20A 40A
Output Power 60W 120W 240W 480W 960W
MTBF >500,000hrs >500,000hrs >500,000hrs >500,000hrs >300,000hrs
PARD (20MHz) <150mVpp <150mVpp <150mVpp <150mVpp <240mVpp
Power 150% Power Boost for 5 Seconds
Indicator Green LED (DC OK)
Line Regulation <0.5% at 320-600VAC, 100% load
Load Regulation < 1% at 320-600VAC, 0-100% load
Hold-up Time > 20ms at 3 x 400Vac
INPUT
Model DRP024V060W3BN DRP024V120W3BN DRP024V240W3BN DRP024V480W3BN DRP024V960W3BN
Phase Input Two or Three Phase
Input Voltage

3 x 320-600VAC (3Ph)

or 2 x 360-600VAC (2Ph)

3 x 320-600VAC (3Ph)

or 2 x 360-600VAC (2Ph)

3 x 320-600VAC (3Ph)

or 2 x 360-600VAC (2Ph)

3 x 320-600VAC (3Ph)

or 2 x 360-600VAC (2Ph)

3 x 320-600VAC (3Ph)

or 2 x 380-600VAC (2Ph)
Input Frequency 47-63Hz
Power Factor Conform to EN6100-3-2 Conform to EN6100-3-2 Conform to EN6100-3-2 > 0.95 @ 3 x 400Vac > 0.95 @ 3 x 400Vac
Efficiency 100% load >86% at 3 x 400Vac >88% at 3 x 400Vac >92% at 3 x 400Vac >91% at 3 x 400Vac >92% at 3 x 400Vac
Input Current < 0.30A @ 3 x 400Vac < 0.4 50A @ 3 x 400Vac < 0.75A @ 3 x 400Vac < 1.0A @ 3 x 400Vac < 1.7A @ 3 x 400Vac
Max Inrush Current < 30A @ 3 x 400Vac < 30A @ 3 x 400Vac < 40A @ 3 x 400Vac < 50A @ 3 x 400Vac < 60A @ 3 x 400Vac
Leakage Current < 3.5mA
ENVIRONMENTAL
Operating Temperature -25°C to +80°C -25°C to +80°C -25°C to +80°C -25°C to +80°C -25°C to +65°C
Power De-rating

> 50°C de-rate power by 2.5% / °C

> 70°C de-rate power by 5% / °C

> 50°C de-rate power by 2.5% / °C

> 70°C de-rate power by 5% / °C

> 50°C de-rate power by 2.5% / °C

> 70°C de-rate power by 5% / °C

> 50°C de-rate power by 2.5% / °C

> 70°C de-rate power by 5% / °C

> 50°C de-rate power by 2.5% / °C
Operating Humidity 5 to 95%RH (Non condensing)
Operating Altitude 0–2,000m
PROTECTIONS
Overvoltage 32V, +/-10% SELV Ouput, Hiccup Mode, Non-Latching (Auto-Recovery)
Overload/Overcurrent > 200% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)
Over Temperature  < 80C Surrounding Air Temperature @ 100% load, Non-Latching (Auto Recovery)
Short Circuit Hiccup Mode, Non-Latching (Auto-Recovery) when the fault is removed)
Degree of Protection IP20
Protection against shock Class 1 with PE (Primary Earth) connection
Galvanic Isolation

Input to Output 4.0KVAC

Input to Ground 2.0KVAC

Output to Ground 1.5KVAC
STANDARDS
Safety SIQ to EN 60950-1, UL/cUL recognized to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme IEC 60950-1
Industrial Control Equipment UL/cUL listed to UL 508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 (File No. 181564)
Electrical Equipment In Power Installations: EN 50178 / IEC 62103
CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
Materials & Parts RoHS Directive 2011/65/EU Compliant
MECHANICAL
Model DRP024V060W3BN DRP024V120W3BN DRP024V240W3BN DRP024V480W3BN DRP024V960W3BN
Case Cover Aluminium Aluminium Aluminium Aluminium Aluminium
Dimensions 121 x 50 x 117.3 mm 121 x 50 x 117.3 mm 121 x 70 x 117.3 mm 121 x 140 117.3 mm 121 x 225 x 117.3 mm
Weight 0.66Kg 0.66kg 0.89kg 1.35kg 2.6kg
Cooling System Convection Convection Convection Convection Convection
Input Terminal 4 Pins (Rated 600V/35A) 4 Pins (Rated 600V/35A) 4 Pins (Rated 600V/35A) 4 Pins (Rated 600V/35A) 4 Pins (Rated 600V/35A)
Input Wire AWG 18-12 AWG 18-12 AWG 18-12 AWG 18-8 AWG 18-8
Output Terminal 4 Pins (Rated 300V/28A) 4 Pins (Rated 300V/28A) 4 Pins (Rated 300V/28A) 4 Pins (Rated 300V/30A) 6 Pins (Rated 300V/30A)
Output Wire AWG 18-12 AWG 18-12 AWG 16-12 AWG 12-10 AWG 12-10
Mounting Rail TS35 DIN Rail TS35 DIN Rail TS35 DIN Rail TS35 DIN Rail TS35 DIN Rail

Selection Table

MODEL NUMBER

Output

Voltage

Output

Current

   Power Boost

( 5 Secs)   

Output 

Power

                   
DRP024V060W3BN

24Vdc

 2.5A 3.75A 60W  
DRP024V120W3BN

24Vdc

 5A 7.5A 120W  
DRP024V240W3BN

24Vdc

 10A 15A 240W  
DRP024V480W3BN

24Vdc

 20A 30A 480W  
DRP024V960W3BN

24Vdc

 40A 60A 960W  

Technical Illustration

Back to Top

Products

Our Product Partners

Powerbox Australia

Follow Powerbox Australia

on Linkedin

POWERBOX AUSTRALIA PTY LTD

Sydney (Head office):
+61 2 9457 2200
sales@powerbox.com.au

POWERBOX PACIFIC LTD

Auckland Office:
+64 9 4158 320
sales@powerbox.co.nz
© 2018 Powerbox. All rights reserved.
Close

Your Sales Enquiry