Product Quick Selection Wheel

DRP 012V SERIES DRP 012V Series - Delta AC/DC DIN Rail

Features
  • 12VDC 15W - 100W
  • 1Ph AC/DC Power Supply DIN Rail Mountable
  • Power will not de-rate for the entire input voltage range
  • Power Boost of 150% for 3 seconds
  • Conformal coating on PCBAs
  • Protected against common dust and chemical pollutants
  • Hazardous Locations approval to ATEX Class I Div 2
  • Overvoltage / Overcurrent / Over Temperature / Short Circuit Protection

DRP 012V Series - Delta AC/DC DIN Rail

Product Overview

 

Delta Electronics CliQ

12Vdc 15W to 100W, 1 Phase DIN Rail Supplies

The Delta CliQ DIN Rail Power Supply series from one of the world’s leading power supply companies, Delta Electronics Group, offers state-of-the-art designs made to withstand harsh industrial environments in accordance to ATEX requirements.

The rugged metal or plastic case is both shock and vibration resistant according to IEC 60068-2. The CliQ single phase and three phase power supply units include overvoltage, overload and over temperature protections for the output. Using a wide input voltage range design, Delta’s CliQ DIN Rail Power Supply series is usable worldwide and features built-in Power Boost of 150% for 3 seconds. Such feature enables reserve power to be always available for reliable startup of loads with high inrush current current thus eliminating the need of a more expensive power supply unit at higher power rating.

The Delta DRP012V series are part of the CliQ series of DIN Rail Power Supplies from one of the world’s largest power supply manufacturers and solution providers - Delta. This product provides an adjustable output capable of operating from input voltages at 85-264Vac, and a wide temperature range of -20°C to 75°C. With a rugged, compact plastic case design that meets shock and vibration requirements (in accordance to IEC60068-2-27 and IEC60068-2-6 respectively), and conformal-coated PCB assembly, this state of the art design is well suited to a broad variety of industrial applications worldwide.

Specifications

OUTPUT
Output Model DRP012V015W1AZ DRP012V030W1AZ DRP012V060W1AA DRP012V100W1AA
Output Voltage 12Vdc 12Vdc 12Vdc 12Vdc
Output Voltage Range 11V - 14Vdc 11V - 14Vdc 11V - 14Vdc 11V - 14Vdc
Output Current 1.25A 2.5A 5A 8.33A
Output Power 15W 30W 60W 100W
MTBF >500,000hrs
Hold-up Time >110ms @ 230Vac
Line Regulation < 0.5% typ. at 100% load
Load Regulation < 1% typ. at 0-100% load
PARD (20MHz) <100mVpp
Indicator Green LED (DC OK)
INPUT
Model DRP012V015W1AZ DRP012V030W1AZ DRP012V060W1AA DRP012V100W1AA
Input Voltage 85–264Vac, 120-375Vdc
Input Frequency 47-63Hz
Input Current <0.22A @ 230Vac < 0.42A @ 230Vac < 0.8A @ 230Vac <1.5A @ 230Vac
Max Inrush <65A at 230Vac <80A at 230Vac <100A at 230Vac No damage at 230Vac
Efficiency at 100% Load > 83% at 230Vac > 85% at 230Vac > 86% at 230Vac > 87.5% at 230Vac
Leakage Current < 1mA @ 240Vac
Power Factor Conform to EN61000-3-2
ENVIRONMENTAL
Model DRP012V015W1AZ DRP012V030W1AZ DRP012V060W1AA DRP012V100W1AA
Operating Temperature -20°C to +80°C
Cooling System Convection
Storage Temperature -25°C to +85°C
Power De-rating > 50°C (2.5%/°C), > 70°C (4%/°C)
Operating Humidity < 95% RH (Non-Condensing)
Operating Altitude 0 to 2,000m
PROTECTIONS
Overvoltage 16V, +10% / -5% SELV Ouput, Hiccup Mode, Non-Latching (Auto-Recovery)
Overload/Overcurrent > 150% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)
Over Temperature  > 80C Surrounding Air Temperature @ 100% load, Latch-off Mode
Short Circuit Hiccup Mode, Non-Latching (Auto-Recovery) when the fault is removed)
Protection against Shock Class 1 with PE connection
Galvanic Isolation

Input to Output: 4.0KVAC

Input to Ground: 1.5KVAC

Output to Ground: 1.5KVAC

STANDARDS
Electronic Equipment EN50718 / IEC62103  In power installations
Electrical Safety TUV Bauart to EN60950-1 UL/cUL recognized to UL60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC60950-1
Industrial Control UL/cUL listed to UL508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 (File No. 181564)
CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC
Materials & Parts RoHS Directive 2011/65/EU Compliant
Hazardous Location / ATEX For DRP60 & DRP100 models, CSAus to CSA C22.2 No.213-M1987, ANSI / ISA 12.12.01:2007 CLass 1, Division 2, Group A,B,C,D,T4, EN60079-0:2009, EN60079-15:2010,  Certificate No. EPS 12 ATEX 1 491.X
MECHANICAL
Model DRP012V015W1AZ DRP012V030W1AZ DRP012V060W1AA DRP012V100W1AA
Case Cover Plastic Plastic Aluminium Aluminium
Dimensions 100 x 32 x 100.6mm 100 x 32 x 100.6mm 121 x 32 x 120mm 121 x 50 x 118.7mm
Weight 0.18Kg 0.20kg 0.33kg 0.64kg
Input Terminal 5 pins (rated 300V/15A) 5 pins (rated 300V/15A) 3 pins (rated 300V/20A) 3 pins (rated 300V/20A)
Input Wire AWG 22-14 AWG 22-14 AWG 22-14 AWG 18-14
Output Terminal 5 pins (rated 300V/15A) 5 pins (rated 300V/15A) 2 pins (rated 300V/20A) 2 pins (rated 300V/20A)
Output Wire AWG 22-14 AWG 22-14 AWG 22-14 AWG 18-14
Mounting Rail TS35 DIN Rail TS35 DIN Rail TS35 DIN Rail TS35 DIN Rail
PBB1P OPTION  (Available on 100W variant)
Input Connector

IEC AC Power Socket

(with 2 meter IEC power cable supplied)

Mounting L Bracket

Optional Mounting bracket available

See technical illustrations

Drip Hood Cover

Optional Drip hood cover

Mounted on top of PBB1P power supply to protect against condensation drips

Selection Table

MODEL NUMBER

Output

Voltage

Output

Current

Power Boost

(3 Secs)   

Output

Power

DRP012V015W1AZ

12Vdc

1.25A 1.87A 15W
DRP012V030W1AZ

12Vdc

2.5A 3.75A 30W
DRP012V060W1AA

12Vdc

5A 7.5A 60W
DRP012V100W1AA

12Vdc

8.33A 12.5A 100W
         

MODEL NUMBER

PBB1P Assembly

Output

Voltage

Output

Current

Power Boost

(3 Secs)   

Output

Power

PBB1P-100W-IEC-12V 12Vdc 8.33A 12.5A 100W

Technical Illustration

  • PBB1P IEC INPUT - ASSEMBLY OPTION PBB1P IEC INPUT - ASSEMBLY OPTION
Back to Top

Your Sales Enquiry