Product Quick Selection Wheel

PSC240 Series PSC240 Series - DC/DC Industrial Converter

Features
  • 210W - 240W
  • Industrial Grade Robust Design
  • Inputs 10 to 550Vdc
  • Single outputs 12 to 110Vdc
  • Reverse Input voltage protection
  • Inhibit Power Down
  • Low voltage alarm. open collector
  • Conformally coating Tropic
  • Accessible from front panel
  • > Output voltage adjustment
  • > Output voltage measurement
  • > Output OK status green LED
  • Operating temp -25C to 70C
  • Euro Mount. DIN Mount. Wall Mount

PSC240 Series - DC/DC Industrial Converter

Product Overview

 

POLYAMP  DC/DC Industrial Converters

Polyamp provide free standing DC/DC converters, which means they meet EMC, EMI, electrical safety requirements and can be installed in any weather protected environment. The units are air cooled, convection cooled and can mostly be mounted in any direction.

The EMC performance is such they can be mounted in low noise applications. The output ripple is among the industries lowest. The immunity levels meet tough requirements in substations, trains, vehicles, railway and industrial applications. We have also models that meet EN50022 special low noise Telecom environment.

The mechanics are based on sturdy aluminum cases, that provides conduction cooling, mechanical stability for any type of vehicles, trains, locos, ships, marine, military rubber wheel vehicles. All units can be mounted on chassis, mounting plate, wall also with TS35 DIN rail. Most units are 19"-rack modular 2U, 3U, 6U.

Polyamp can provide special mechanics solution and systems based on our units, as well as Secure 2x N+1 redundant systems for power utilities, off shore applications and many more.

Polyamp production system is ISO9001:2008 certified

Specifications

INPUT
Nominal voltage See Selection Table
Current at no load 3W–5W max
Softstart

Yes within rush current limit

output
Output voltage See Selection Table
Voltage adjustment -10% to +10%
Output current See Selection Table
Current limit 105%
Ripple & Noise pk-pk 10mV pk - pk typical
Regulation Line:0.2% L1 to H1; Load:0.2% NLtoFL
Temperature Coefficient 0.02% per°C
Transient Response 10% up to100% typical <2mS
Efficiency Single outputs 79% – 95% typical Multi outputs 75%–85% typical
Parallel Operation Single outputs only (derate power by 10%)
Series Operation Yes
PROTECTION
Overvoltage Protection Parallel diode.
Shortcircuit protection Yes
Reverse Voltage protection Option
Overload Protection Yes
Protection Fuse on board, reverse voltage protection
Isolation

Input / Output: 24, 48, 2kVdc

Input / Output: 10, 220, 440, 2.5kVac, 4kVdc

Input / Case: 24, 48, 2kVdc

Input / Case: 110, 220,440, 2.5kVac, 4kVdc

Output / Case: All outputs 2kVdc

 

ENVIRONMENTAL
Operating Temperature -20°C to +70°C (PSC50/80–5V only +55°C)
Storage Temperature -40°C to +85°C
Derating No Full load to 70C
Cooling Convection
STANDARDS AND APPROVALS
Safety Standards IEC60950
C-Tick AS/NZSCISPR11:2002Group1ClassA
Immunity Standards EN61000-6-2 EN/IEC61000-4-4 EN/IEC61000-4-5Level2&3
OPTIONS
A Over voltage protection (OVP) A built in SCR thyristor short circuits the output when an overvoltage occurs. The trigger voltages 15% higher than the nominal output voltage.
C Series diode on output For parallel redundant applications built in series diodes can be provided. The output power may be derated depending upon the model.
E1 2.5kVAC isolation between input/output and input/case. On 24 & 48V inputs.The emission level increases to level A.
E2 Same as E1 but also 2.5kVAC between output/case.
L Front panel for eurorack 10,12,14TE
K1 Input diode in series
K2 Built in glass fuse on PSC80, PSC100 and PSC150
N Wall mounting brackets
H15-S H15 female screw connector
O Rear Euro rack mounting brackets
S Remote sense
NTC Inrush current limit with NTC
INPUT Mobile application, consult sales
MECHANICAL
Case Euro cassette
Dimensions See Technical Illustrations
Connectors 15 Pole DIN standard 41612H15
Mounting See Technical Illustrations

Selection Table

 
MODEL NUMBER

INPUT

VOLTAGE

OUTPUT

VOLTAGE

 OUTPUT

CURRENT

CASE

WIDTH

OUTPUT

POWER

 
PSC240 24/12 18-32V 12V 17.5A 12TE 210W
PSC240 24/15 18-32V 15V 14A 12TE 210W
PSC240 24/24 18-32V 24V 10A 10TE 240W
PSC240 24/48 18-32V 48V 5A 10TE 240W
PSC240 24/110 18-32V 110V 2.18A 10TE 240W
PSC240 48/12 38-60V 12V 17.5A 12TE 210W
PSC240 48/15 38-60V 15V 14A 12TE 210W
PSC240 48/24 38-60V 24V 10A 10TE 240W
PSC240 48/110 38-60V 48V 5A 10TE 240W
PSC240 48/110 38-60V 110V 2.18A 10TE 240W
PSC240 110/12 88-150V 12V 17.5A 12TE 210W
PSC240 110/15 88-150V 15V 14A 12TE 210W
PSC240 110/24 88-150V 24V 10A 10TE 240W
PSC240 110/48 88-150V 48V 5A 10TE 240W
PSC240 110/110 88-150V 110V 2.18A 10TE 240W
PSC240 220/12 175-300V 12V 17.5A 12TE 210W
PSC240 220/15 175-300V 15V 14A 12TE 210W
PSC240 220/24 175-300V 24V 10A 12TE 240W
PSC240 220/48 175-300V 48V 5A 12TE 240W
PSC240 220/110 175-300V 110V 2.18A 12TE 240W
PSC240 440/24 350-550V 24V 10A 10TE 240W
PSC240 440/48 350-550V 48V 5A 10TE 240W
PSC240 440/110 350-550V 110V 2.18A 10TE 240W

Technical Illustration

Back to Top

Your Sales Enquiry