Product Quick Selection Wheel

DC/DC CONVERTER - WIDE INPUT PD - DC/DC Converter

Features
  • 40 - 110W
  • WIDE INPUT
  • DC/DC CONVERTER
  • LOW COST
  • ENCLOSED OR L BRACKET
  • MOLEX STYLE CONNECTOR
  • OVER VOLTAGE AND CURRENT PROTECTED
Specification Sheet Make a Sales Enquiry

PD - DC/DC Converter

Specifications

INPUT
Input voltage 10–30VDC (PD40 & 65 – L series)
20–60VDC (PD40 & 65 – M series)
30–90VDC (PD40 & 65 – H series)
10–20VDC (PD110 – L series)
18–36VDC (PD110 – M series)
36–72VDC (PD110 – H series)
Input current 4.1A (rms)
for 24VDC typical for PD65
2.1A (rms) for 48VDC typical for PD65
1.5A (rms) for 72VDC typical for PD65
output
Output voltage/currentSee rating chart
Total output power 40W, 65W and 110W
Ripple & noise 1% pk-pk max.
Overvoltage protection Set at 112–132% of its nominal output voltage
Overcurrent protection All outputs protected to short circuit conditions
Temperature coefficient All outputs ±0.04% per °C maximum
Transient response Maximum excursion of 4% or better on all
models, recovering to 1% of final value
within 500µs after a 25% step load change
Output derating See notes
OPERATING
MTBF 100,000 hours minimum at full load at 25°C ambient
Switching frequency 32kHz ±5kHz
Efficiency 70% minimum at full load
Line regulation ±0.5% maximum at full load
Withstand voltage 1000VDC from input to output
ENVIRONMENTAL
Operating temperature 0°C to +70°C
Derating Derate from 100% at +50°C linearly to 50% at +70°C
Storage temperature -40°C to +85°C
Relative humidity 5%–95% non-condensing
STANDARDS AND APPROVALS
C-Tick AS/NZCISPR11 Group 1, Class A

Selection Table

PD40 SERIES (40W) OUTPUT #1   OUTPUT #2 OUTPUT #3    
MODEL NUMBER VNOM. IMIN. IMAX. TOL. VNOM. IMIN. IMAX. TOL. VNOM. IMIN. IMAX. TOL. MAXIMUM
OUTPUT
POWER
PD40-10 5V 0A 8.0A 2% 40W
PD40-12 12V 0A 3.5A 1% 40W
PD40-13 15V 0A 3.0A 1% 40W
PD40-14 24V 0A 2.0A 1% 40W
PD40-23 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% 40W
PD40-24 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% 40W
PD40-25 +5V 0.5A 3.0A 3% +24V 0.1A 1A 5% 40W
PD40-30 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% -5V 0A 0.8A 5% 40W
PD40-31 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% -12V 0A 0.8A 5% 40W
PD40-32 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% -15V 0A 0.8A 5% 40W
PD40-33 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% -12V 0A 0.8A 5% 40W
PD40-39 +5V 0.5A 3.0A 3% +24V 0.1A 1A 5% -12V 0A 0.8A 5% 40W
NOTE: 1. All multi-output units may be operated at no load without damage. At no load, output tolerance increases to 10%

2. Suffix codes for mechanical format and input range are as follows. PD40-XXYZ; "XX" is the model code from the above table, "Y" is the input range
(L = 10–30VDC, M = 20–60VDC, H = 30–90VDC) and "Z" is the mechanical format (A = open PCB, B=L-bracket, C=enclosed), eg, PD40-31MC
(20–60VDC input range, enclosed).

3 "L" series is suitable only for 75% of the above stated maximum output power.
PD65 SERIES (65W) OUTPUT #1   OUTPUT #2 OUTPUT #3     OUTPUT #4    
MODEL NUMBER VNOM. IMIN. IMAX. TOL. VNOM. IMIN. IMAX. TOL. VNOM. IMIN. IMAX. TOL. VNOM. IMIN. IMAX. TOL. MAXIMUM
OUTPUT
POWER
PD65-10 5V 0A 10A 1% 50W
PD65-12 12V 0A 5.5A 1% 65W
PD65-13 15V 0A 4.5A 1% 65W
PD65-14 24V 0A 3.0A 1% 65W
PD65-23 +5V 1A 6.0A 3% +12V 0.5A 3A 5% 65W
PD65-24 +5V 1A 6.0A 3% +15V 0.4A 3A 5% 65W
PD65-25 +5V 1A 6.0A 3% +24V 0.3a 2a 5% 65W
PD65-30 +5V 1A 6.0A 3% +12V 0.5A 3A 5% -5V 0.1A 0.5A 10% 65W
PD65-31 +5V 1A 6.0A 3% +12V 0.5A 3A 5% -12V 0.1A 0.5A 10% 65W
PD65-32 +5V 1A 6.0A 3% +15V 0.4A 3A 5% -15V 0.1A 0.5A 10% 65W
PD65-33 +5V 1A 6.0A 3% +15V 0.4A 3A 5% -12V 0.1A 0.5A 10% 65W
PD65-39 +5V 1A 6.0A 3% +24V 0.3A 2A 5% -12V 0.1A 0.5A 10% 65W
PD65-40 +5V 1A 6.0A 3% +12V 0.5A 3A 5% -12V 0.1A 0.5A 10% -5V 0.1A 0.5A 10% 65W
NOTES 1. All multi-output units may be operated at no load without damage. At no load, output tolerance increases to 10%.

2. Suffix codes for mechanical format and input range are as follows: PD65-XXYZ; "XX" is the model code from the above table, "Y" is the input range
(L = 10–30VDC, M = 20–60VDC, H = 30–90VDC) and "Z" is the mechanical format (A = open PCB, B =L-bracket, C = enclosed), eg, PD65-31MC
(20–60VDC input range, enclosed).

3. The models for 10–30VDC input range are suitable only for 70% of the above stated maximum output power.
PD110 SERIES (110W) OUTPUT #1   OUTPUT #2 OUTPUT #3       OUTPUT #4    
MODEL NUMBER VNOM. IMIN. IMAX. TOL. VNOM. IMIN. IMAX. IPEAK TOL. VNOM. IMIN. IMAX. TOL. VNOM. IMIN. IMAX. TOL. MAXIMUM
OUTPUT
POWER
PD110-10 5V 0A 22A 3% 110W
PD110-12 12V 0A 9.0A 2% 110W
PD110-13 15V 0A 7.5A 2% 110W
PD110-14 24V 0A 4.5A 2% 110W
PD110-16 30V 0A 3.6A 2% 110W
PD110-23 +5V 0.8A 10A 3% +12V 0A 5A 9.0A 3% 110W
PD110-31 +5V 0.8A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% 110W
PD110-32 +5V 0.8A 10A 3% +15V 0A 4A 7.5A 3% -15V 0A 1A 4% 110W
PD110-40 +5V 0.8A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% -5V 0A 1A 4% 110W
PD110-41 +5V 0.8A 10A 3% +15V 0A 4A 7.5A 3% -15V 0A 1A 4% +24V 0A 1A 4% 110W
PD110-42 +5V 0.8A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% +12V 0A 1A 4% 110W
PD110-45-1 +5V 0.8A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% +24V 0A 1.5A 10% 110W
PD110-45-2 +5V 0.8A 10A 3% +24V 0A 3A 5.0A 3% -12V 0A 1A 4% +12V 0A 1A 4% 110W
PD110-46 +5V 0.8A 10A 3% +15V 0A 4A 7.5A 3% -15V 0A 1A 4% -5V 0A 1A 4% 110W
NOTES 1. Peak output current with 10% maximum duty cycle for less than 60 seconds.

2. PD110 "M" & "H" series are suitable only for 110W maximum at 20 CFM forced air cooling or 80W maximum at convection cooling. PD110 "L" series are suitable only for 90W maximum at 20 CFM forced air cooling or 70W maximum at convection cooling.

3. Suffix codes for input range, mechanical format and connector are as follows: PD110-X1X2X3X4X5, "X1X2" is the model code from the above table, "X3" is the input range.

(L = 10–20VDC, M = 18–36VDC, H = 36–72VDC), "X4" is the mechanical format (A = open PCB, B = L-bracket, C = enclosed) and "X5" is the input and output connector code

(Blank + Molex KK type, T = miniature terminal block), eg, PD110–31MCT (18–36VDC input range, enclosed format and miniature terminals blocks).

Technical Illustration

  • PD65 ENCLOSED PD65 ENCLOSED
  • PD110 ENCLOSED PD110 ENCLOSED
Back to Top

Products

Our Product Partners

Powerbox Australia

Follow Powerbox Australia

on Linkedin

POWERBOX AUSTRALIA PTY LTD

Sydney (Head office):
+61 2 9457 2200
sales@powerbox.com.au

POWERBOX PACIFIC LTD

Auckland Office:
+64 9 4158 320
sales@powerbox.co.nz
© 2018 Powerbox. All rights reserved.
Close

Your Sales Enquiry