Product Quick Selection Wheel

CET - e-one 1000VA with by pass e-one 1000VA with by pass SERIES

Features
  • DC In: 48 Vdc
  • AC In: 230 Vac
  • AC Out: 230 Vac
  • Power:1 kVA 0.8 kW
  • Peak Efficiency 91%
  • Operating temperature -20 to 65°C.
  • High reliability
  • Very low ripple voltage

e-one 1000VA  with by pass SERIES

Product Overview

CET - e-one 1000VA with by pass 

e-one, stand-alone inverters a step forward!, Incredible compactness and reliability, while protecting loads and batteries 

Main Features:   e-one is a stand-alone inverter capable of converting a 48 VDC power source into a pure sine wave of 230 VAC at 50 Hz. This inverter can deliver 350 VA / 300 W while operating from -20 to 65°C. e-one can be easily rack, wall or desk-mounted.

Input /Outputs:  DC In: 48 Vdc,  AC In: 230 Vac,  AC Out: 230 Vac,  Power: 1 kVA , 0.8 kW  

Best in-class solution   With dimensions of 1U x 230 mm x 165 mm, this very small inverter occupies just 1,600 cm³. e-one provides a perfect AC output (pure sine wave) that lets your critical loads to work their best. We also guarantee a very low ripple voltage compliant with the telecom standard. In practical terms, this means almost no disturbances reach your DC load or batteries; a great benefit as disturbances considerably reduce battery life. Finally, regarding reliability, the e-one inverter is based on our Y-One inverter which has an incredibly low failure rate..

Applications   e-one is the ideal solution for powering and securing telecommunication equipment (5G, WiFi repeaters, supervision, maintenance, cooling, security and access for base stations, etc.) and many others (CCTV cameras for traffic control system, police radio network, etc.).

Specifications

GENERAL
Peak Efficiency DC/AC

91%

Material (casing)

Coated steel

AC Output Power

1000 VA / 800 W

Short time overload capacity

150 % (15 seconds) within T° range

Admissible load power factor

0 lagging to 0 leading

Nominal voltage (DC)

48 V

Voltage range (DC)

40 - 60 V

Nominal current

19 A at 800 W / 48 VDC

Maximum input current

28 A / 2 mV psopho @ 48 V - 80% LOAD

(for 15 seconds) / voltage ripple

Nominal voltage (AC)

230 V

Nominal frequency

50 Hz and 60 Hz

(Separate part number )

Voltage range

207 - 253 Vac

Frequency range

50 Hz (range 47 – 53 Hz) / 60 Hz (range 57 – 63 Hz)

Nominal voltage (AC)

230 V

Frequency / frequency accuracy

Separate part number for 50 Hz / ± 0.1% and 60 Hz / ± 0.1%

Total harmonic distortion

< 3 % (resistive load)

Turn on delay

20 s

Nominal current.

4.35 A at 230 VAC

Protected against reverse current

Crest factor

at nominal power

2.5 : 1

With S/C management

and protection

> 9A (2xIn) for 15 s and then no output power from module

Transfer time

< 10 ms from DC mode to By-pass mode and vice-versa

RELIABILITY
Dielectric strength DC/AC

4300 Vdc

RoHS

Compliant

MTBF

200 000 hrs

Signaling & Supervision
Display

Front LED

Alarms output / supervision

Dry contact on the front

Remote ON / OFF

On the front

ENVIRONMENTAL
Cooling

Forced cooling with FAN speed control

Ambient temperature

-20 to 65° C Derating from 50° C to 65° C

Storage temperature

-40 to 70° C

Relative humidity

95 %, non-condensing

Altitude

< 1500 m / derating > 1500 m – 0.8 % per 100 m

Vibration

GR63 office vibration 0 to 100 hz-0.1 g / transport vibration 5-100 Hz 0.5 g 100 to 500 hz-1.5 g / Drop test

COMPLIANCES
Standards

IEC60950

ETS 300 386 – 2 : 2mV

EN 55022 Class A Radiated and Conducted

ETS 300 132 – 2 : Product Standard

IEC 61000-3-2 harmonic current class A

EN61000-4-2 ESD criteria A - 15 kV Air and 8 kV contact

EN61000-4-3 RF Field – Enclosure Port criteria A : 10 V/m

EN61000-4-4 Burst - All ports criteria A : 2kV

EN61000-4-5 Surge criteria B all ports

EN61000-4-6 class A criteria A 10V

Technical Illustration

Back to Top

Your Sales Enquiry