Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally..
PV voltage up to 150V: The BlueSolar MPPT 150/70 and 150/85 charge controllers will charge a nominal voltage battery from a higher nominal PV array. The controller will automatically adjust to a 12, 24, 36 or 48V nominal battery voltage.
Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum powerpoints may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstandng conversion efficiency: Maximum efficiency exceeds 98%. Full output power up to 40C.
Flexible charge algorithm: Fully programmable charge algorithm. One user programmable algorithm. Manual or automatic equalization. Battery temperature sensor. Battery voltage sense option.
Extensive electronic protection: Over-temperature protection and power derating when termperature is high, PV short circuit and PV reverse polarity protection, PV reverse current protection.
CAN bus: To parallel up to a 25 units, to connect to a Color Control panel or to connect to a CAN bus network.
