Product Quick Selection Wheel

PSX Series PSX16 & PSX24 - 1 U Micro Compact - Telecom Rectifier Systems

Features
  • 800W - 2400W
  • Configurable Battery Charging System
  • 1U 19" Rack Mounting
  • Network Monitoring
  • N+1 Operation
  • System Monitoring Load & Battery MCBs
  • Battery LVD
  • Customized shelf configurations available
  • Fully Featured Telecom Grade Rectifier

PSX16 & PSX24 - 1 U Micro Compact - Telecom Rectifier Systems

Product Overview

 

Enatel’s 1U Micro Compact, DC Power Systems

The PSX16 & PSX24 Series 1U Micro Compact DC Power Systems range in power output up to 2.4kW and have a maximum output current of 50A. They are the ideal solution to meet the requirements of telecommunications applications such as access nodes and micro/pico base stations.

This range has been designed with the installer in mind giving true front connect for DC outputs and a pull out tray monitor for ease of alarm cabling installation.

Enatel’s 1U micro compact DC Power Systems have been designed to be easily installed into any standard 19” rack or ETSI 515mm/300mm deep rack and can be customized and configured to meet the individual requirements of each customer.

Smart rectifier design allows the RM648/RM848 rectifiers to measure and report AC input voltage to the system supervisory module with out the need for additional hardware.

Specifications

input
AC input 240V AC (90-300V) Single phase
Frequency range 45-66 Hz
Power factor >0.99 full load
Termination Termination Single phase, 6 or 10mm² L, N, E tunnel terminals

PolarityPositive earth

OUTPUT
Nominal voltage -48V
Rated system output power Up to 2400W @ -48V
DC DISTRIBUTION
Load Standard Shelf configuration. (Customized configuration available)*
Battery Standard Shelf configuration (Customized configuration available)*
Breaker fail detection Electronic fail detection on both load and batterybreakers
Load Battery Tunnel terminals 10 mm²
Low voltage disconnect 50A battery LVD (magnetically latching) fitted as standard
ENVIRONMENTAL REQUIREMENTS
Ambient Temperature -20ºC to +70ºC ( Derating from 50ºC)
Storage Temperature -30ºC to +85ºC
Humidity 5-95% RH (non-condensing)
Altitude <2,500m at full power
MECHANICAL

Dimensions

482.6mm (standard 19" module), 44.45mm (1U), 285mm; W,H,D
Weight 5kg (excluding rectifier modules)

Shipping Dimensions

540.0mm, 95.0mm, 400.0mm; W,H,D

Shipping Weight

6.0kg (excluding rectifier modules)
MONITORING & CONTROL
Display Multi-lingual alpha numeric backlit display 
Communications

Serial: 1x USB port on front panel for local PC interface

TCP/IP: Ethernet interface for communication using SNMP protocol and internal web based configurator*

Modbus: Supported via TCP/IP*

LED Indicators

Green: Power on/monitor OK

Yellow: Non urgent alarm

Red: Urgent alarm

Audible 90dBA buzzer mappable to user defined conditions
Controls 3x push buttons for parameter setting or viewing on front panel
Signal Inputs

Serial bus for rectifier control and interface to peripheral modules

6x digital inputs

2x temperature sensors (one fitted by default)

Alarms 6x alarm relays, 5x of which can be mapped for customised alarm settings
Alarm Contacts 0.3A 100V volts free changeover contacts
Logging Capacity

Periodic log, 16,384 records (dependant on number of parameters logged)

Event log, 16,384 records (dependant on number of parameters logged)

Connections Relay outputs, mini combicon to accept 1.5mm² wire USB port, USB mini B
*TCP/IP and modbus options only available with SM36 supervisory module.
CONFIGURATION and OPTIONS

Rectifiers

RM648: 600W modular rectifier, 110/230V AC input, 48V DC output, 12.5A maximum output current

RM848: 800W modular rectifier, 230V AC input, 48V DC output, 16.6A maximum output current

Supervisory Modules

M36: enhanced monitor featuring full temperature compensation, automated and manual battery testing/equalisation with TCP/IP

ACA-BC08P2

2m, 8mm² Ø battery cable kit (other lengths available to special order)

ARBP-0M

Metal rectifier blanking panel

Selection Table

Model Number

RECTIFIERS

FITTED

SHELF OUTPUT POWERDC DISTRIBUTION
PSX16-PB1-01    1

48VDC 800W

Positive Earth

5 x load C/B's (2A)

1 x load C/B (30A) 

2 x 30A Battery MCB’s

80A magnetically latching battery LVD

PSX16-PB1-02     2 48VDC 1.6 KW

Positive Earth

5 x load C/B's (2A)

1 x load C/B (30A)

2 x 30A Battery MCB’s

80A magnetically latching battery LVD

PSX16 V2    2

48VDC 1.6kW

Positive earth

6 x load circuit breakers (6-30A)

2 x battery circuit breakers (max 30A)

80A magnetically latching battery LVD

PSX24 V2    3

48VDC 2.4kW

Positive earth

4 x load circuit breakers (6-30A)

2 x battery circuit breakers (max 30A)

80A magnetically latching battery LVD

PSX24 V3    3

48VDC 2.4kW

Positive earth

6 x load GMT fuses (1-15A)

2 x battery GMT fuses (2 x parallel pairs, 1-30A)

80A magnetically latching battery LVD

*System part numbers are dependent on configuration options. For final system part numbers consult our sales staff for configuration advice.

Technical Illustration

Back to Top

Your Sales Enquiry